Chicken Coop Heat Lamp Mount System #2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lamp mount is angled at 7.5 degrees down and the inner diameter is 36.7mm to fit a ceramic bulb mount.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 24
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution — Share Alike
This is the same model as #1. Lamp mount is angled at 7.5 degrees down and the inner diameter is 36.7mm to fit a ceramic bulb mount.
Securely mount a heat lamp to the inside of your chicken coop or other structure with one simple cut. The bulb and reflector are inside while the switch, if your lamp has one, is located on the outside. There is a “roof” to protect the electrical components from excess water intrusion. The light is pointed down 7.5* for better heat distribution. Screws can be used directly on the model. I added Kadrick threaded inserts as a metal spacer to hold the stress instead of the plastic.
Because this is in the elements, featuring -40 to 100+ degrees, use PETG or a similar material to handle the harsh conditions.
I used 15% infill with 4 walls to strengthen up the model. I also printed at a 45* in both the X and Y planes for a stronger grain.
Please post your makes and upgrades.