Short joystick extension for VPforce Rhino or thrustmaster compatible sticks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This extension is a little under 50mm tall, bring the stick forward by 33mm and tilts it 10 degree forward.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 76
- Makes
- 0
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
This extension is a little under 50mm tall, bring the stick forward by 33mm and tilts it 10 degree forward.
There is a version of the extension with and one without access hole that may help if you have a thick/long connector. Also helpful when printing with organic supports
I included an adapter for generic/TM compatible bases, I did not test that, I only tested the rhino adapter.
You need to glue the adapter in the extension, it will clamp the nut and allow it to turn. Its a tight fit and a few drops of CA glue will make it stronger than you think.
I printed mine in PLA with the exception of the nut, I printed that in PETG as its the weakest part. Use 100% infill for that part and for the adapter. For the extension itself, I used 4 perimeter walls and 50% infill, seems strong enough.
I remixed the knurled nut and adapter from here:
https://www.thingiverse.com/thing:3625918/files
