1 / 3
Simple K1/K1C Door Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple door clip for Creality K1/K1C to allow air flow in without having the door fully open.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 88
- Makes
- 1
- Views
- 624
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This simple clip keeps the door of the K1/K1C slightly ajar when printing PLA, without compromising inner airflow from the side fan. Untested on the K1 Max and K2 Plus.
Best printed in PETG, but PLA does seem to work, if less satisfyingly springy.
Just clip to the inner door seal, being very careful with the rubber seal itself as it can peel off. Then a little push on the clip when you close or open the door. Just pop it off when you need the door fully closed.
If you like this model, then please:
EdinBearDragon