Bicycle Handlebar Extender (22mm, 23.8mm, and 32mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
A remix of CreamyWhites work available here. After taking this mount off and on a couple of times, the threads in the plastic started to degrade. My initial reason for printing this was that the swytch kit battery on my bike blocks any light attached to the handlebars; this extender clears the battery so the lights works properly. This design uses an M4 nut and bolt to secure it all together so should last longer than the previous model. I have redesigned the model in inventor so I could create a 22mm and 32mm version.
Uses 4 M4x30mm bolts and 4 M4 locking/normal nuts for the arm and clamp. V4.1 uses 2 M5x20mm Bolts. V4.2 uses 2 M5x30mm bolts and 2 m5 nuts for the barrel. Pause the print at layers 75 and 324 printing at 0.2mm layer height to insert the captive nuts.
V1: Nut sizes on arm clamp too large and barrel inner hole too small for M6 and too big for M5 when scaled to 23.8mm.
V2: Scaled parts from 22m to 23.8mm, decreased nut size on arm clamp to work with 23.8mm, remade barrel for M6 bolt and increased length to 76mm for clearance on wide stems.
V3: Increased bolt head hole diameter (to 8mm) to fit EasyFix M4x30mm Bolts from Screwfix.
16/02/24 V4: Redesigned the 23.8mm in inventor so I could edit parts easier. I then added a 22mm and a 32mm version. I also changed the barrel bolt to be m5 rather than m6 as this size is probably more common.
18/02/24 V4.1: Cutoff 1mm from ends of arm and arm clamp so they clamp on to handlebars tighter for a more rigid frame.
10/04/24 V4.2: Added 2 captive m5 nuts to the barrels.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
No
Supports:
No
0.2
Infill:
20
Notes:
4 perimeters and 20% infill minimum for PLA
Category: Sport & Outdoors