xTool AP2 dual inlet kit for M1 Ultra and F1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enables 2 xTool laser machines (M1U and F1) to be connected to the AP2 air purifier simultaneously.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 59
- Makes
- 0
- Views
- 888
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
About the kit
This kit allows you to connect the xTool M1 Ultra and F1 laser cutters/engravers simultaneously to the new AP2 air purifier.
There are 2 blast gate assemblies for shutting off the non-active machine to avoid suction loss.
The M1 blast gate has an angled duct to set it apart from the back of the machine.
Contents
The kit comprises:
- 80mm elbow duct for the AP2 inlet port
- Dual manifold 84mm to twin 63mm (connects to elbow duct)
- M1 Ultra blast gate assembly - elbow outlet, spacer and gate, screw in pipe outlet
- F1 blast gate assembly - 66mm outlet, spacer and gate, 63mm outlet
Additional parts required:
- 4x6mm M3 bolts and nuts for each blast gate assembly
- Standard xTool 63mm pipe ends
Printing
I've printed mine in PLA on the Bambu P1P(S).
- Layer height: 0.2mm
- Wall loops: 6
- 25% infill
The elbow duct, manifold and the elbow section of the M1U blast gate assembly benefit from tree supports.
I'm happy to answer questions about the setup.