62 models
Radiators/water heaters should be degassed before the heating season to increase efficiency of the heating and prevent issues. Every time I used a cup or almost anything to vent the radiators I got water on the floor or on the wall.…
Printed using eSUN PETG +HS, .2 layer height, four walls and three top and bottom layers for the base and two walls and two top and bottom layers for the dampers (BTW PETG without addatives is the bane of humanity). I screwed up the…
My personal issue with my XL printer started a few weeks ago. This is my first summer with my XL and I am finding out that my garage is just too hot for the XL to work. When the temp gets up to 90ish, the printer has one of the sensors…
You'll need: 6x Hex-Nut 3mm 6x M3x12mm Screw
Bambu Lab X1C - glass lid riser 30 mm + venting holes
My windows are already 15+ years old and some of the covers for the venting slots broke. I designed new ones to be a 1:1 replacement and printed it with white PET-G. Best is to print complete solid for maximum durability. No supports…
This adapter allows to install a venting tube to a small slot opening in a window frame or door frame. The CAD file is a full parametric OpenScad model, this allows to set many parameters with the OpenScad Customizer such as tube…
this remix of the right edge prevents it from hitting the chain holder during the Y zero axis search
I found this cap, which is pretty much perfect. https://www.thingiverse.com/thing:3164779 I also found this plug, which is cool, but not easily removable. https://www.printables.com/model/25391-1lb-propane-discharge-plug I decided to…
The cover fits inside a 110 mm PVC pipe (inner diameter 106 mm), fixed with glue or silicon. No need to drill holes or use mounting plates. The cadquery script allows calculation for different sizes, but the voronoi screen must be added…
Extra bumpers / antennas to attach to front of vacuum's bumper to prevent it from getting stuck under kitchen cabinets. Printed from PETG.
This remix is based on another remix that adds the means to slide the SAMLA box backwards to allow for venting when printing PLA. I have added a small coating of TPU (3 layers) for a smother finish that makes sliding smoother.…
Three parts to easily vent the base model Adventurer 5M with simple diy parts. The general design here is that most enclosures are leaky, so it's good to ‘vacuum’ the chamber, making all the air leaks flow inward (and not into the room) -…
110 mm PVC pipe is a convenient venting pipe for extractor fans. We have strong winds, and hence, rain water can be driven into a horizontal pipe. The vent cover is used with an EF-1009 inline fan which has a back-draught shutter,…
Designed to print in single-colour pieces, so you don't need a multicolour printer. You may need to adjust the tolerances for your printer so everything fits together. I included the .3mf files I used to print it on my Prusa MK3S. The…
EDITED: A simple correction to the method I describe makes it much more easy: 1. After adding the brim ears, just merge them with the object to be printed. (All about negative part etc, can be skipped). 2. Even better solution: - place a…
Remix of the original mast mount case for a 5mm offset of the solar panel. Use PU sealant or silicone for panel fitting (not hotglue). For the rest of the case, full instructions and BOM use the original design.
10% Infill seems to be enough for this model. I printed with Fillamentium White PLA. It seems to fit the Eero Pro 6E Mesh well and within an hour the unit seems to be cooler and the desktop is no longer hot.
material PETG ver1 - vase mode - recommended nozzle 0.6 or 0.8 ver2 - thick 1mm
I didn't want to have to move my cover backwards to vent as I don't have the space behind my printer, so I've designed a hinged replacement insert that raises the storage box up around 12mm instead. They should slot straight into the…
This is a modified G2E Cable Cover with Voron Logo for venting. You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 &…
This remix allows for RGBW LED strips which are typically 12mm wide. Up to 12.5mm wide strips should work. Direct line-of-sight to the LEDs through the top glass is prevented. SpectreGadget's original design for holding the glass up for…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
These are parts to connect another inline fan to 2" PVC for venting the SL1S printer. Connection should look like this… SL1S printer > Fan mounting backplate for SL1S into… "SL1S fan gate adapter.stl" ( see files section ) into… a 2" flex…
Just some simple interlocking coasters you can use to store: Bath oil bottles Face creams Whatever other bottle you have that's sticky or tends to leak They're designed to fit Kneipp bath oil bottles but should fit most. You should be…
I mostly print PLA, PETG and TPU. Instead of having to remove the cover, I prefer raising it by 15 mm and leaving it on top the printer. Here is a fast printed raiser... Print it in TPU because it needs to be twisted to install and TPU is…
This is a model i have made because i every now and then experience that my X1 series printers when wiping form color change or just of startup the poop is getting splashed/knoked into the chamber and sometimes on the bed. I have printed…
A slightly bigger adapted insert for Cyberdyne's Topcover that hinges in place instead to vent the cover. The inserts are print-in-place, with no supports needed, there is a very small supports in the hinge, so the first time you rotate…
Designed by dwoodfield , all credit goes to him. It wasn't on this site and I think it could help a lot of people if they can find it. All files are uploaded as they were. Original description from Thingiverse below: Summary Creality…
A simple lid holder for your X1C or P1S in order to vent during PLA printing and prevent heat creep. It'll slot into the little hole in the foam and when the lid is on top, it's quite secure. The label is a text object in the .3mf file,…
My nespresso machine has a habit of sucking the tank empty, after which the pump will not pump any water anymore, even after the tank is filled again. Some solutions to this can be found online, like pressing the lever backwards (didn't…
Canoe paddel drip preventing ring
Thought I would try a different approach to a compensator, so have made it vent at the front Print Settings Rafts: Yes Supports: Doesn't Matter **Resolution:** .20 Infill: 50% **Filament:** Ender PLA Grey or whatever you prefer Notes:…
I printed the trash can for compost by desk and after one day there was a lot of moisture. Came up with this design using some charcoal filter to allow moisture out and hopefully keep the smell down. Uses 4 m3x12mm screws Print…
Front joiner is adapted for open lid if printing PLA or Petg
Preventing bees from picking off bees from hive eyes. It prevents bees from being picked off by small birds. The bee can fly and return, but the bird will not approach it, the barrier will not allow it to reach the bee with its beak.…
This is a modded Filamatrix Cable Cover with an added Voron Logo for Venting
Print this in brass filament if you can.
This is a custom-designed funnel that magnetically attaches to a metal kitchen hood filter, routing 3D printer exhaust through a flexible hose. Size: 200x200x115 mm Magnets: 4x2 mm Flexible pipe: 40 mm diameter My model is printed with…
I remixed this model to have venting holes on the sides. The size that currently has is for the creality spools. If you want to change the size for using it in another spool you will have to change the holes parameters because they are…
I needed a couple of funnels to use in the kitchen, and although there are many to choose from here on Thingiverse, I couldn't help but design my own. This design has ridges that keep it from sealing when used with a bottle or jar. It…
Simple tool to vent leftover CO2 gas. I tested it with only about-to-be-empty containers/tanks, and it is not supposed to be used on full one. The small hole has 5/16" thread. It can be printed without support.
I had an extra bathroom ventilation fan, so why not use it! This is my solution for cooling my MK4 electronics and, at the same time, venting the inside of the enclosure. The enclosure I have has a side panel that opens and it is the…
The original design by Lars is excellent, however, I don't always have time and such which is required for such a project with the welding, programming etc, and also wanted to add filtration as a possibility. The system has heating to…
Exhaust fan setup to vent air out of from enclosed 3D printer and processing area to outside to improve air quality indoors and reduce plastic and any cleaning solution odours from 3D printing and processing. Additional non-printed items…
I designed this model after my GMRS magnetic antenna cable kept getting crushed by my car door, even when I routed it through the softest locations. Specs: Designed to fit 0.20” Dia. coax, but can be scaled to fit whatever size you need…
To connect the back venting fan of phrozen ARCO FDM printer, I made an adaptor to connect with 10cm ventilation pipe. 4 magnet holes are preserved for 8mm(diameter) x 4.5mm(thickness) round magnet. PETG is preferred for sufficient…
As our cat has recently developed an interest in the heating vent, I have designed a cap to protect it. Suitable for Stelrad®, Kermi® and probably many other manufacturers. Da unser Kater neuerdings ein Interesse für die Heizungentlüftung…
This gas warning sign is an essential safety component for any direct-venting system. Since most gas vents are located outdoors, they can easily get obstructed by vehicles, large objects, debris and snow. Obstruction of proper ventilation…
The P-01 can use longer mags but there is a risk of over-insertion when reloading with the slide locked back. These will help. For two different mag models, can't recall the exact models.
To avoid deformation of the tube during clamping and sawing, I designed this custom fixture. A rigid setup is especially important when using a band saw to ensure a precise cut. Print instruction: material: PETG or similar supports: no…
Simple venting valve for HT50 tubing. I designed this to suppress the annoying gurgling noise when our drain pump switches off. This was my first print with my mk3 years ago. So I think i used the silver PLA shipped with the printer. It…
Eggtimer ION Altimeter Case Protect and securely mount your Eggtimer ION with this purpose-built avionics case. (2-Piece, Heat-Insert Design) A compact, durable enclosure designed specifically for the Eggtimer ION altimeter. This case…
Modding your device can void your warranty and I won't take any responsability if you cause any damage during the process. Installing this backplate require to detach the battery from the original part to transfer it. It is hard glued and…
Modeled off the Apple “cheese grate” though slightly different. I needed something to vent and would prevent kids from sticking papers inside. Time will tell if this works…
Odvzdusneni uskladnene wc kazety Dometic. Pokud je umistena ve voze, napojeni na hadici vnitrniho prumeru 8mm. Tisteno z PETG Vent for Dometic toilet waste tank. For storing a spare tank in a motorhome. Connection to the hose, internal…
I didn't want to have to move my cover backwards to vent as I don't have the space behind my printer, so I've designed a hinged replacement insert that raises the storage box up around 12mm instead. They should slot straight into the…
A slightly bigger adapted insert for Cyberdyne's Topcover that hinges in place instead to vent the cover. The inserts are print-in-place, with no supports needed, there is a very small supports in the hinge, so the first time you rotate…
Eggtimer ION Altimeter Case Protect and securely mount your Eggtimer ION with this purpose-built avionics case. (2-Piece, Heat-Insert Design) A compact, durable enclosure designed specifically for the Eggtimer ION altimeter. This case…
I remixed this model to have venting holes on the sides. The size that currently has is for the creality spools. If you want to change the size for using it in another spool you will have to change the holes parameters because they are…
this remix of the right edge prevents it from hitting the chain holder during the Y zero axis search
EDITED: A simple correction to the method I describe makes it much more easy: 1. After adding the brim ears, just merge them with the object to be printed. (All about negative part etc, can be skipped). 2. Even better solution: - place a…
