1 / 9
Exhaust air duct venting from enclosed shelving to outside — image 1
1 / 9

Exhaust air duct venting from enclosed shelving to outside

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Exhaust air ducting (101mm diameter) for printer area to vent air odor outside.

Rating
0 / 5
Likes
6
Downloads
14
Makes
0
Views
145
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Exhaust fan setup to vent air out of from enclosed 3D printer and processing area to outside to improve air quality indoors and reduce plastic and any cleaning solution odours from 3D printing and processing.

 

Additional non-printed items required

 

Printing Tips

  • Print with FDM printer using PLA at 10% infill and 0.25mm layer height
  • For Window exhaust adaptor slice model (52cm height) to desired window height before printing and depending on printer use slicer to print in sections.

 

Assembly

  • Exhaust Fan setup on Shelf
    • Once top adaptor is printed use it to mark the location of the drill holes on the top of the shelf. 
    • Once corner holes marked also use the marks to set cross lines between opposing marks to identify the centre location for the vent opening on shelf.
    • Use drill to create corner holes to accept a 4mm bolt diameter.
    • Use dremel with circle tool to create opening using the centre mark.
    • place bolts (4mm diameter) through top adaptor and exhaust fan and slot through top of shelf.
    • slide bottom adaptor into bolts protruding from base of shelf and use lock nuts to secure.
    • slide ducting air hose over top adaptor and secure with zip tie.
    • secure other end of ducting hose to window adaptor and secure with zip tie
    • Add additional articulated venting adaptor heads to base of bottom adaptor to extend air intake.

 

Usage

This was put into play as part of a broader initiative to control poor air quality (see article)

Tags