1 / 9
Exhaust air duct venting from enclosed shelving to outside
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exhaust air ducting (101mm diameter) for printer area to vent air odor outside.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Exhaust fan setup to vent air out of from enclosed 3D printer and processing area to outside to improve air quality indoors and reduce plastic and any cleaning solution odours from 3D printing and processing.
Additional non-printed items required
- 2 x zip locks (each 12 inches in length)
- 1 x air ducting hose - 4 inch (101.6mm) diameter, 8 feet flex duct hosing
- 1 x exhaust fan - 120mm x 25mm 110V 220V AC Powered Fan with Speed Controller 3V to 12V with 4mm diameter holes
- 4 x 4m by 60mm bolts (for shelves that are 0.5inches thick) + nuts
Printing Tips
- Print with FDM printer using PLA at 10% infill and 0.25mm layer height
- For Window exhaust adaptor slice model (52cm height) to desired window height before printing and depending on printer use slicer to print in sections.
Assembly
- Exhaust Fan setup on Shelf
- Once top adaptor is printed use it to mark the location of the drill holes on the top of the shelf.
- Once corner holes marked also use the marks to set cross lines between opposing marks to identify the centre location for the vent opening on shelf.
- Use drill to create corner holes to accept a 4mm bolt diameter.
- Use dremel with circle tool to create opening using the centre mark.
- place bolts (4mm diameter) through top adaptor and exhaust fan and slot through top of shelf.
- slide bottom adaptor into bolts protruding from base of shelf and use lock nuts to secure.
- slide ducting air hose over top adaptor and secure with zip tie.
- secure other end of ducting hose to window adaptor and secure with zip tie
- Add additional articulated venting adaptor heads to base of bottom adaptor to extend air intake.
Usage
This was put into play as part of a broader initiative to control poor air quality (see article)