Party Light Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a collection of party lights that can be illuminated.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 28
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a collection of party lights that can be illuminated. You have multiple bulbs to choose from including a cactus, pear, Mario Block and a pumpkin.
DO NOT scale down or the light socket definitely won't fit!
The bulbs that require supports have them designed into the parts so you don't need to add any. Just break them off after you print them with a pair of pliers. Use an outer brim on the bulbs, cactus flower and stems.
There is a hole on the back of the base that allows a 12VDC barrel connector to be epoxied in.
The bases bottom cover snaps into the bottom and is not designed to be removed once installed.
If you want to install the light use the following parts:
T10 Light Bulb Socket: https://www.amazon.com/dp/B07FSK5LTH
Light Bulb (LED): https://www.amazon.com/dp/B07GRVN7R6
Barrel Connector (DC Jack): https://www.amazon.com/dp/B0D5H4DZTJ
12V AC Adapter: https://www.amazon.com/dp/B0792261BP
Print the base upside down to eliminate the need for supports (exactly how it's orientated in the STL file).
The bulbs should be made of a lighter color (red, yellow, white, green, orange, etc) to allow light to pass through. Print the stems out of brown. Print the cactus flower out of red or orange.
The models shown were printed using ABS and a .12mm layer height.
Please Like and upload a make!