1 / 7
Fractal Define 7 XL 140mm Cooling Ducts — image 1
1 / 7

Fractal Define 7 XL 140mm Cooling Ducts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cooling ducts for Fractal Define 7 XL Case that utilizes 140mm fans

Rating
0 / 5
Likes
14
Downloads
47
Makes
0
Views
1,103
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

Since the Fractal Define 7 XL is a large case, i wanted to use air coolers, but i wanted it to be efficient and utilize the least amount of fans. 
i am happy to do any modifications if required. Let me know if i missed anything or you need any specific modifications.


Updates:

  • added GPU_twin_2
  • added CPU_twin
  • updated GPU_twin

 

CPU:

  1. 140mm_cpu_duct_straight_230mm:
    • This design utilizes a 140 fan that is mounted on the front of the case, the fan is on axis with the CPU cooler.
    • The duct is offset to clear the motherboard power cable. 
    • The area of the duct's outlet is the same of the Noctua NH-D15s
    • The duct length is 229mm due to wanting to keep the RAM visible and printer constraints
  2. 140mm_cpu_duct_offset_230:
    • This design utilizes a 140 fan that is mounted on the front of the case, the fan is at the maximum height to leave space for another 140mm fan to feed the case.
    • The duct is offset to clear the motherboard power cable. 
    • The area of the duct is the same of the Noctua NH-D15s face
    • The duct length is 229mm due to wanting to keep the RAM visible and printer constraints
  3. 140mm_cpu_duct_straight_310mm:
    • This design utilizes a 140 fan that is mounted on the front of the case, the fan is on axis with the CPU cooler.
    • The duct is offset to clear the motherboard power cable. 
    • The area of the duct is the same of the Noctua NH-D15s
    • The duct length is 319mm, it requires the cpu cooler fan mounted in a Pull-Configuration. (i can make one for a Push-Config fan if required)
  4. 140mm_cpu_duct_offset_310:
    • This design utilizes a 140 fan that is mounted on the front of the case, the fan is at the maximum height to leave space for another 140mm fan to feed the case.
    • The duct is offset to clear the motherboard power cable. 
    • The area of the duct is the same of the Noctua NH-D15s face
    • The duct length is 319mm, it requires the cpu cooler fan mounted in a Pull-Configuration. (i can make one for a Push-Config fan if required)
  5. 140mm_cpu_duct_offset_twin:
    • This design utilizes two 140 fans that are mounted on the front of the case.
    • The duct is offset to clear the motherboard power cable. 
    • The area of the duct's outlet is the same of the Noctua NH-D15s
    • The duct length is 305mm


 

GPU:

  1. 140mm_gpu_duct_straight:
    • This design utilizes a 140 fan that is mounted on the front of the case, the fan is at the lowest position without removing the HDD caddies cover.
    • The duct is offset to be on axis with the GPU fans. 
    • The height is made to be below the GPU and the width is the same as the GPU.
  2. 140mm_gpu_duct_twin:
    • This design utilizes two 140 fans that are mounted on the front of the case, the fans is at the lowest position which requires removing the HDD caddies and their cover.
    • The duct is offset to be on axis with the GPU fans. 
    • The height is made to be below the GPU and the width is the same as the GPU.
    • This version is not tested due to my printer's limits.
  3. 140mm_gpu_duct_twin_2:
    • This design utilizes two 140 fans one is mounted on the front of the case, the other is on the bottom, the fans is at the lowest position which requires removing the HDD caddies and their cover.
    • The duct is on axis with the GPU fans. 
    • The outlet height is made to be below the GPU and the width is the same as the GPU.

 

 

Tags