SCX10 III Basecamp Front Bumper -- Pinched
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a front bumper that allows for good approach angle and has a much narrower profile then the original.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 149
- Makes
- 1
- Views
- 755
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this.
I used PETG-CF as the main material and used PLA for supports. I printed on an angle and had a 8mm brim with almost none of the bumper actually sitting on the build plate. All overhangs were reinforced up to 40 degrees with organic supports.
For print settings I used 4 parameters and 25% gyroid infill at .2mm layer height. For Prusa XL users see the following link for PETG with PLA supports.
I put the