1 / 2
Christmas/Winter Snowman for Lego Wreath — image 1
1 / 2

Christmas/Winter Snowman for Lego Wreath

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A basic flattened snowman for the Lego Wreath provided here: https://www.printables.com/model/218071-lego-wreath

Rating
4.8 / 5
Likes
106
Downloads
303
Makes
5
Views
1,293
Reviews
5

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

A basic, press-fit snowman for the Lego Wreath provided here: https://www.printables.com/model/218071-lego-wreath

The body, eyes, mouth, hat and nose can be printed separately for those who don't a multi-filament system printer.

Should be printed with the face down and might require support depending on your printer, but newer ones should be able to deal with the small overhangs without any issue.

Which files might require support?

  • Body.stl
  • Hat_sticky.stl

But your slicer should tell you that ;-)

Files:

  • There are separate files for each body part that can be clicked into the body (press-fit)
  • There are two versions of the hat:
    • Hat.stl
      Is a glue-on version of the hat
    • Hat_sticky.stl
      Is a stick-on press-fit version of the hat with a back side

Since the hat is either glued or pressed on, you can decide on which side the hat is placed.

Colors:

  • Orange for the nose 
  • Black for the eyes, mouth, buttons and hat
  • Feel free to adjust the hat to your liking
  • In my case I used 
    • Jayo PLA+ “Sunny Orange”
    • Jayo PLA+ “Black”
    • Jayo PLA+ “White"

Designed in Fusion 360.

Print time is roughly 50 minutes.

 

Other models used in the image:

UPDATE: Fixed nose scaling for better stickiness.

Tags