[Blank Remix] GameboyCartCAD_FDM_Optimized
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.79 – €0.96 net (excluding VAT)
For file: FDM_GB_Cart_Blank_0.4n_0.2mm_PLA_MK4S_41m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 40.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple slicer remix of the excellent work by PizzaHandhelds to remove the embossed pizza logo.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend asked me to 3D print a Gameboy cartridge in transparent orange filament to create OrangeGB.
I came across this excellent work by PizzaHandhelds who optimized the Gameboy cartridge design for 3d printing.
I don't have SolidWorks to modify the provided SLPRT files myself. So I added a part modifier in PrusaSlicer to fill in the gaps allowing him a tiny bit more room to work with.
Only the back shell was modified but I've included the front for completion.
Printing Settings
Open the provided 3MF file and select Open as Project it will have the following configuration below.
- 0.2mm STRUCTURAL print profile
- Prints slowly
- Modified part only works on 0.2mm layer height
- Supports
- For support enforcers only
- Paint on supports for 45 degree overhangs
- Paint on supports (These are so minor you can snap both pieces together anyway without having to remove them)
- Infill
- Fill density: 20%
- Fill pattern: Aligned Rectilinear
- Top fill pattern : Aligned Rectilinear
- Bottom fill pattern: Aligned Rectilinear
Printed in PLA but I'm sure PETG works great too! Grey cartridge for comparison.
For more information about printing clearly check out CNC Kitchen's Test Model for Transparent PETG
Big thank you to PizzaHandhelds once again!