Turbiter for Orbiter V2/2.5 Modified for use with Oribtool tool board.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turbiter for Orbiter V2/2.5 Modified for use with Orbitool 2 tool board.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 52
- Makes
- 2
- Views
- 1,452
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of the Turbitor v3.0. I shortened the overall length and added standoffs for the mounting of the Orbitool2 tool board. This fits my Orbitool fan mount. Orbitool Fan Mount 4010 w/umbilical support. by xXDFAXx | Download free STL model | Printables.com
This is a 3MF file and the modifications are shown as solids! Slice the files and you will see the final product.
Material: Polymaker ASA Pop Green - Extruder 275c* Bed 100c
*REVO HF Obxidian .04* Set your printing temperature for your printer.
Print Settings: 3MF has these settings set, adjust as needed ORCASLICER 2.2.0
Printed on West3d Super Stick build plate, no glue needed.
.25 first layer
.20 all other layers
8 walls (highly recommend for better clamping loads)
5 top and bottom layers
single wall top and bottom
35 % Cubic
inner/outer
reverse on inner
precise wall
precise z
Recommend using this with CN3D's cable chain v2 and umbilical mount.
Sovol SV08 Cable Chain V2 by Nadir @ CN3D | Download free STL model | Printables.com