Turbiter for Orbiter V2/2.5 Modified for use with Oribtool tool board.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turbiter for Orbiter V2/2.5 Modified for use with Orbitool 2 tool board.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 2
- Wyświetlenia
- 1454
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of the Turbitor v3.0. I shortened the overall length and added standoffs for the mounting of the Orbitool2 tool board. This fits my Orbitool fan mount. Orbitool Fan Mount 4010 w/umbilical support. by xXDFAXx | Download free STL model | Printables.com
This is a 3MF file and the modifications are shown as solids! Slice the files and you will see the final product.
Material: Polymaker ASA Pop Green - Extruder 275c* Bed 100c
*REVO HF Obxidian .04* Set your printing temperature for your printer.
Print Settings: 3MF has these settings set, adjust as needed ORCASLICER 2.2.0
Printed on West3d Super Stick build plate, no glue needed.
.25 first layer
.20 all other layers
8 walls (highly recommend for better clamping loads)
5 top and bottom layers
single wall top and bottom
35 % Cubic
inner/outer
reverse on inner
precise wall
precise z
Recommend using this with CN3D's cable chain v2 and umbilical mount.
Sovol SV08 Cable Chain V2 by Nadir @ CN3D | Download free STL model | Printables.com