Wowstick 1F+ Handle Grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found the anodised finish on the handle of my Wowstick 1F+ to be a bit slippery when manually tightening/loosening…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 66
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I found the anodised finish on the handle of my Wowstick 1F+ to be a bit slippery when manually tightening/loosening screws. So I made a handle grip to go over the Wowstick to make it feel more like a traditional screwdriver. It has a hole in the end to allow the USB cable to plug in for charging.
The handle is designed to be printed in PLA, and has a very tight fit on the Wowstick, so no glue or anything is required to stop it slipping. To fit the grip, I heated it up with a hot air gun until it was about 70 deg Celsius then the PLA was soft enough to easily slide on.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
Yes
0.20mm
Infill:
50%
Filament:
Generic PLA
Category: Tools