1 / 3
MJX Hyper Go 1/14 Scale Turnbuckle Spacer (Replacement or Additional for Timing)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MJX Hyper Go 1/14 Scale Turnbuckle Spacer
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 26
- Makes
- 0
- Views
- 553
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
MJX Hyper Go 1/14 Scale Turnbuckle Spacer
These units always seem to come with the toe angle off and needing adjustment out of the box.
Adding this spacer will allow you to tighten the turnbuckle down. You can manually chop off z height to make it smaller if needed. I've included a few sizes.
This can also just be used to print a replacement.
3 sizes are included in the files. 1.25mm is the original size.