Magnetic door catch for acrylic doors-Chiusura magnetica per ante
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic catch system for acrylic doors for printer enclosure- Sistema di chiusura magnetica per ante di copertura della
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Magnetic hatch for acrylic doors, for example for a self made printer enclosure. The hatch is designed to hold up to 4 magnets with 5 mm of diameters and 2 millimeters of thickness, for an acrylic/plexiglass thickness of 3 mm. I suggest to print with a 0.1 mm layer thickness, and to decide the number of magnets to glue on the basis of the necessary strength (in my case 2 magnets were enough). For a better stability glue the pieces on the doors with a bit of cianoacrylate.
Chiusura magnetica per ante in acrilico, ad esempio di una copertura per la stampante. Il sistema può alloggiare fino a 4 magneti di 5 mm di diametro e 2 mm di spessore, ed è disegnato per spessore dell'anta di 3 mm. Suggerisco di stampare con uno spessore del layer di 0.1 mm e di aumentare progressivamente il numero di magneti in base alla forza richiesta (nel mio caso 2 sono stati sufficienti). Per una maggiore stabilità incollare i pezzi per le ante con un po' di colla cianoacrilica.