Attack on Titan - The Cast Portrait Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cast of Attack on Titan Anime. Very detailed and long print. Pictures are of actual prints.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 39
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Back Story
Attack on Titan is one of my favorite anime. I liked it more when it started. The hiatus took the luster away. It took too long to make and the story took a weird turn. However, it is still one of my FAVES. I have several prints of Attack on Titan.
This one is of the Cast. Looks decent. Colors on point. This is a long print, but if wanted to do it right, should take 3 times as long. That's over a day in an 0.2 nozzle at .04mm. I just don't have the time for that right now. Maybe when I can get another printer. If I print, I will share. Just too much detail to print right in 0.08mm.
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.
Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Orange
At layer #17 (1.44mm) swap to Jade White for the rest.
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.
More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames
They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections
