187 models
Vytvořeno a zkoušeno na kávovaru Sage BES875BKS (pro některý trh pod značkou Breville). Pravděpodobně by mohlo fungovat i pro jiné mlýnky do kterých se dává páka s průměrem 54mm a spínáním zatlačením na páku, ale nemam vyzkoušeno. V…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
I use it for vitamin C dosage. 1 spoon = 1000 mg Používám ji na dávkování vitamínu C. 1 lžička = 1000 mg Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Odměrka na kávu, cukr a podobné sypké hmoty (Measuring cup for coffee, sugar and similar loose materials)
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
This is a replacement plastic lighthead mount for a Goodman style handle. I made this to replace the broken mount on my Dive Rite handle. My Dive Rite light heads have an external diameter of 45mm and my lighthead mount had in internal…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Small metric measuring spoon, usefull for measuring small volumes of fertilizer for example. 0.5 ml, 1 ml, 2 ml, 5 ml --------------- Malé odměrné lžičky, vhodné například na odměření malého množství hnojiva pro domácí květiny.
A simple Goodman handle that you can print and use for your diving lamp. Just add two M6 screws, nut and washers and it's good to go. You have five M4 countersunk through-holes to attach a mounting plate for your specific lamp. Update…
Updates: 23.10.15 - I re-uploaded the covers and tray because I forgot to clearance them when I red-did them. 23.11.06 - Added a hygrometer frame for round hygrometers with vertical mounting tabs. Introduction In my 7 years of 3D…
The original ModMic base clasp is under constant stress and can breakdown quite quickly. Here is a replacement part. It is almost like the original, but with minor tweaks for 3D-printing. I use this for my ModMic Wireless, and it works…
Odmerka oleja pre 2, 2,5 4 a 5 litrov benzinu pre pomery 1:33, 1:40, 1:50 a 1:25. Pre 2 litre odmerat objem 1x na spodne vystupky, pre 2,5 litra je hladina oleja zarovno s hornou vodorovnou plochou vystupku, na ktorej je napis prislusneho…
Updated (2024 Nov 24) - Several people were asking for my Z-axis parts, so I'm uploading them. The bed required 10mm steel threaded balls to be mounted in the front corners and rear center. Depending on the thickness of your bed, you will…
Upgrade your Antlion ModMic Wireless with this oversize battery cover that supports up to a 600mAh LIPO 503040 battery. This is a simple and easy way to extend the battery life of your ModMic Wireless by up to 200%. Spacer is to fille the…
The files leverage shipping tubes in order to create the main body of the thunders pears this allows for a very light weight but structurally sturdy prop. I have a video tutorial that explains how to assemble the thunder spears. The video…
The best torch handle for technical dives. Material - PETG Nozzle - 0.6mm Layer height - 0.3mm Infill - 60%
Odm gear fits with lego minifig. before printing use mesh fixes plugin in Cura also you can print it in resin because the quality will be better but if you only have fdm i would use a 0.2mm nozzle
The "big brother" of the original E3CNC ! [Currently untested] Still based around the Ender 3 Pro (and its clones) but with a little more heft to it. This version is just a side project I did to use up some spare 12mm rods i had laying…
Add a 6x2 mm magnet and some 3M adhesive and you can use your microphone on another headset. It might bee necessary to use glue to get the magnet to stay. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No…
odmerka na soľ pre konvičku Rhino Horn
I wanted to give a try to the Goodman handle concept so I designed one to go with my new Sofirn SD01Pro dive light. Also, having a GoPro like camera I added a foldable arm to be able to jump into water with the light (and camera) hanging…
Omni Directional Movement gear from Attack on Titan made for the Dummy 13 figure
Measuring cup/scoop with volume of 200 ml. Created to measure larger quantities of solid particulates like washing powder. Designed with robust ergonomic handle and flat opening to easily scoop powder from cardboard box. Printed with…
Goodman handle for my VTL3500P BigBlue dive torch. Additional material: 3x screw M3 x 15mm 3x washer M3 12x1mm 2x washer M3 10x1mm 2x injection nut M3 See my bungee mount for this torch:…
Bungee mount for DL07. Update: Now in version V2 with wider base and deeper holes for the bungee knots Update: In version 3, the thickness was increased so that the nodes are completely hidden in the holes. Feel free to leave a like or…
Don't know where to put your ModMic when you're not using it? This is the print for you! This small holster allows you to hang up your ModMic Wireless anywhere you like. It's intended to be used with another fastener - e.g. velcro, 3M VHB…
A place to mount an Antlion ModMic wireless microphone that can rest on your shoulders. Allows you to use the ModMic if you use earbuds, incompatible headphones, or no headphones at all.
Our bathroom drawers were getting a bit chaotic so I designed and printed these simple sliding trays that fit on the side slats of the Godmorgon drawers. There are 3 different designs, I might upload some more if I get around to making…
This is still in development, but some people asked about it. Updates will follow as I work towards a final version. This is a refined and optimized version of my previous Ender 5 ModMax design . I was looking to improve three aspects of…
My wife hated the SD01 because it is too bulky and heavy. Then I watched a video about ISE Alien light … of course, why not use two of our backup lights as a single primary! The burn time of SD05 is plenty for our dives. The beam of SD05…
I have created a Goodman handle for the lamp Sofirn SD01 and also SD09L. The width of the handle inside is 105mm. I used this great model as a source of ideas: https://www.printables.com/de/model/85131-goodman-handle-for-sofirn-sd01 The…
IMPORTANT! I scaled it all wrong when making it in fusion360 because I'm dumb, and It's 10x bigger than it should be, so scale both files down to 10% Main body needs support on the clips that attach to the main body The filter mesh has a…
This model of a Goodman handle has been specially developed for the Sofirn SD05 and Wurkkos DL30 diving lamps. Print out all parts remove the supports insert the nuts for the screws screw everything together Dieses Modell eines Goodman…
This is a goodman handle designed for the XTAR D26 diving flashlight - it may also fit other models. You will need an M6x20-22 stainless steel bolt and a spring washer. You will also need some 4mm bungee cord. I prefer to print it with ~5…
Here's my version of Thouless Art's ODM lightsaber design from their Mandalorian Levi concept art. Print all the parts and pit everything together with a 1/2 in wooden dowel rod. Be sure to post and make and check out my other models.…
GoodMans Wireless XE Headphones (Hinge Fix) So you broke your headphones, in the words of the Hitch Hikers Guide to the Galaxy ‘Dont Panic’ This model will replace the entire top band to which the hinges are part of. Although they are…
This requires a 6x3mm neodymium magnet (what I had lying around). I have included the step file if you have different magnets on hand.
my plastic holders that came with the mod mic all broke but the magnets worked fine so why not make a version that allows the use of the original magnets. the microphone holds even stronger now than with a original plastic bit. i hope…
Woodmon from the videogame/anime series Digimon
A handle similar to a Goodman handle for inexpensive XTAR D26 torch for diving.
Print with the smallest Layer Height you can and 100% Infill. Each part should work with the original Counterpart. You have to glue the magnet in and maybe soften the plastic a bit by heating it up. If you need a base try this one:…
These are furniture legs originally designed for an Ikea Godmorgon bathroom column/high cabinet. Normally, these columns should be screwed into the wall at their upper part, but sometimes that is not possible. However, they should be…
Adapter to fit the ModMic Microphone to the Sony XM5 using the 3.5mm jack on the headphone. Prints well at 0.15mm height without any support (other that the support build into the model.) Use the magnet from the standard ModMic adapter…
The genuine modmic cable clips are far to expensive for this little plastic in my opinion. So i designed them for 3d printing. Works quite well for me. Single wall print, add brim to hold it to the print bed.
PS1 style USB cover based on Jeff Chen's original design, modified to fit Goodmans USB-C 2M cable in grey.
Optimalizováno pro FDM tryska 0,4mm vrstva 0,2mm
Odměrka 12,5 ml na instantní čaj, kávu nebo léky - 12.5 ml measuring cup for instant tea, coffee or medicine
My original clips broke, and printing replacements was cheaper than OEM replacements + shipping! I printed in PETG. PLA or any other rigid plastic should be fine as well. No supports needed.
Needed something to store and charge my wireless modmic. Didn't find anything online so I can up with this. So far its working great. Setup to use small screws for mounting. Double sided tape may also work but I have not tried it. Used…
This is a holder that prevents Ikea Godmorgon vanity drawer dividers tipping over.
From scratch re-design of @Stefa , I made a quite a few reconsideration and refinement for my design. The idea is to release the CAD files so by modifying the parameters one can make one's own goodman handle by measure. Enjoy.
[EN] Coffee scoop for measuring approx. 7g/10g of coffee. Dimensions: 7g: 120 x 40 x 23 mm (length, width, height) 10 g: 130 x 50 x 28 mm (length, width, height) Material: PLA Layer height: 0.2 mm Infill: gyroid (15 %) Supports:…
The goodmans wireless charging pad proved to be a bit slippery. This solves the problem and provides a stand too. Originally I uploaded to thingiverse. Fusion 360 file included
Handle for Wurkkos SCUBA dive light. Will need small amount of bungee cord as a wrist strap. Handles included for DL30 and WK20 Lights found here (No affiliation, not an affiliate link)
A generic version of my modmic mount for relatively flat headphone cups. To use it remove the double sided adhesive that came already attached the modmic mount and replace it with a big sheet of 3M VHB or similar
These are the X gantry parts for the ModMax upgrade if you're using the FYSETC lightweight gantry for the Zero G Mercury One for the Ender 5. Updated - 31st Dec 2024: Added new versions of the top sections for more linear rail clearance…
Same as the E3CNC RODMOD but with zero backlash nuts, similar to the Milo CNC.
A small mounting surface to mount your modmic to your pair of Sundaras. Bonuses Allows avoiding mounting directly to the headphone cups. Allows the mic to swivel slightly left and right. Hardware 2 x M3 16mm flathead screws (I used…
Wenn man am Auto,am Schaltschrank,an einer Anlage arbeitet und keinen Tisch oder ne Ablagefläche hat ,dann ist man damit gut bedient ! Mit dem richtigen Stativ kann man die Höhe und Neigung einstellen und jederzeit leicht drehen , Die…
This is a towel holder for the IKEA Godmorgon Bråbiken wash stand in the photo. 2021-12-03 Improved design. 2020-04-30 Added version without screws. Print instructions Recommended 9 perimeters (at 0.4) on the sides so they are strong.…
A simple little clip-on holder to suit Godmorgan IKEA Drawer & Braun Toothbrush head. Print instructions Print on it's side, no supports %20 infill. To clip on, engage the top and lever in the bottom (your milage may vary). Post a build…
testmill on ureol /Hard Foam 100x100 1hr used a R2 Ballnose Have fun to put your writng inside See the other CNC stuff i made g-code by blendercam
A lithophane depicting Saul Goodman. It becomes a very high-detail image once you shine a light behind it, whether it's your ceiling lamp or you've put it on an outside-facing window (during the daytime, at least). Everyone loves Saul!…
A small collection of parts I designed for my Ender 5 that I upgraded based on the ZeroG Mercury One and SilentMobius MaxXY mods. Parts include: Cable chain mounting tower (2 variants with different cable management) Cable chain mount for…
a cool ornament made form image the objekt is 100x100mm 10mm Depth END milling with a R2 Ballnose Gcode by blendercam Total milltime around 2hr Have fun MORE Woodcarve search CNC on my account here HAVE FUN
The small adapter has a fin that screws in behind the cable guide. Original screws can be used. The modmic adapter clip seats in the recess.
I made this replacement foot/stand for the dividers in IKEA Godmorgon drawers based on the original foot (you can see comparison in the photos). To avoid supports, lay it flat on the trapezoid side in the slicer (like you see in the cover…
This is a Goodman Handle with bungees for the Sofirn SD01. The design has already been tested over months and found to be good. In the back, another bungee is pulled through the lamp to fix the rear part on the arm. Feel free to leave a…
I have no clue if it is possible to print this on variety of printers as it is quite a tight fit (0.05mm on the entrance, scaling just a bit should fix it though). Could not come up with better solution for the rotating mechanism, lol.…
This is a redesign of the “PRO FLASH MOUNT” for the GOODMAN ZONE, which now fits a SMALLRIGH Cold Shoe 1241 properly, and also still has the bubble level. The Sides have also been shortened a bit, so that you can pass bungee cord from the…
V2: V2 folder contains the updated pieces with a new joining mechanism that hopefully works a lot smoother than the last one. Printing at half scale should fit a 4mm ball, and should also be able to be printed without supports. I would…
Print settings Material PLA Base settings Prusa 15mm QUALITY Modified settings Gyroid infill 6 top and bottom layers 6 perimeters
používám na čistící přípravek do vytíracího robota
Was getting frustrated with the modmic losing adhesion from the k7xx headphones as there was no perfect spot for it. Designed this to allow for a solid surface for the modmic to attach to. I printed mine with the pad side down. Category:…
This cup can be used for easy scooping and measuring liquid or powdery materials, such as washing powder or fabric condioner. Or anything else that crosses your mind! It is easy and quick to print.
This is an insert designed for the small container of the Godmorgon set from IKEA. https://www.ikea.com/de/de/catalog/products/50400270/ It holds up to 30 viols of baking aroma like the one from Dr. Oetker or Ruff.
While building my GOODMAN Zone, i found out that the DeWalt TLM30 Laser Rangefinder, which is mentioned and shown all over the project, and for which a mount is provided, is now End-Of-Life and has been replaced with the DeWalt TLM40 -…
This is a remix of lionpants' original modmic mount, but adjusted for M3 10mm cap head screws Changes to Outer 4mm counterbore for M3 10mm cap head screw Changes to Inner 4mm captured nut (extended from 2.4mm) for M3 nylock nut as opposed…
This design is printed in two pieces. Wall mounting: 2 wall plugs 6 mm + screws.
Stop the "Pasta Guessing Game"! Have you ever cooked enough spaghetti to feed an entire army by accident? This minimalist tool helps you measure the exact amount of pasta for 1, 2, or 3 portions. Design Features: Ultra Compact: With…
This is a 3D printable goodman handle used by divers carrying a canister light. Can be adjusted so it accomodates drygloves and neoprene gloves. I have uploaded a version for the MARES DCT series and for Greenforce lights, feel free to…
Add some 3M VHB double sided adhesive or other similar product to the back and stick it onto your DT880s
Press-fit a 6x3mm magnet at the holder and you're good to go.
Tento model má rozměry 12x12x2 cm. Při tisku doporučuji výplň 100%, aby vám při použití voda hned nevytekla.
Coasters with the logo of the football club from Serbia, Partizan. The coaster is in a multicolor version, printed on a P1S printer. I made it so that only the multicolor variant changes in the first two layers, and the layer is 0.16 to…
Created as a fix for a guy doing a course, still not broken I believe.
Je potřeba použít transparentní/průhledný typ filamentu
This is a remix of the Godmorgon tray, that can be printed with no supports.
I made this after my mum had cataract surgery done on her eyes. The doctor prescribed a specific brand of eyedrops called “ODM5”, made by Horus Pharma. Sidenote: That stuff is a giant ripoff, because it is basically NaCl solution, aka…
A bust of Saul Goodman from the Better Call Saul TV series. AI-Generated on Makerworld.com.
Goodman handle for backup-lights from Polaris, Dir-Zone and Scubatech-Tekline. The holes are for 5mm bungee-cord. Feel free to use the scad-file to remix ist. Category: Sport & Outdoors
I wanted a waist level finder for my printed Goodman Zone v1.0 but there wasn't one available. This works with 4xM3 hex bolts utilized in other areas of the camera build along with magnets sourced from my local hardware store and a…
Hooks that can be screwed to the wall directly under the ceiling for Ikea Godmorgon LED light. I had used PETG with 3 perimeters and 15% infill. 4mm holes for the screws
The spring clamp for head(amame) V2 with an added flat circular spot sized specifically for mounting a ModMic.
A goodman style handle with bungees. Different adapters can be added to the handle to securely attach your dive torch. The adapter is attached using four 3x6mm hex bolts like these…
This is a tissue box holder. You can clip it under a glass ottom in a cupboard in order to free the space below it. See my photos for it. I created this for the IKEA GODMORGON cupboard. There are 2 versions here: one for a glass bottom…
This is a simple adjustable goodman handle for the Nanight Tech 2 dive torch. Printed in PETG with 4 walls and 80% infill.
I wanted to have a Goodman handle for my SoFirn SD-05. So I created this model. Any other 26mm light can be clamped as well. Solidworks files are included, so if you want to make one for a different diameter, be my guest. Just make sure…
To edit the OpenSCAD File you'll need https://github.com/revarbat/BOSL2
Remixed @CookieTyrant s excellent work to add some rolled edges as well as open the internals to better accommodate my particular battery I used on my mod mic. NOTE: grab the spacer from the original file set:…
