1 / 8
Busts Bahador Lionclaw
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
package Voracious Sands
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Temperature:
- Extruder: 200–230°C (check the specific requirements of the silk filament you’re using, as it may vary slightly).
- Print Bed: 50–60°C for stable adhesion.
Printing Speed:
- 40–60 mm/s: Silk filament tends to highlight details and gloss, so a lower speed helps to improve quality.
Layer Thickness:
- 0.2 mm: For a good balance between detail and printing time.
- 0.1 mm: If you’re aiming for very high detail (but it will increase the printing time).
Retraction:
Adjust retraction to avoid stringing (unwanted thin filaments between parts):
- Distance: 1–2 mm
- Speed: 20–50 mm/s
Note: I cannot include the STL files as they are part of a package that is for sale. I’ve only attached the images to showcase the print quality of the MK4S.