Heewing T2 Cruza nose for Decased GP10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heewing T2 Cruza nose for Decased Flywoo GoPro 10 with space for 270pan servo, HD VTX and antennas
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits the Flywoo decased GoPro 10 (not the latest bigger one but the previous generation). Some rework maybe needed to fit the new one, feel free to remix.
There is an insert for a 270° pan servo from AtomRC (or any similar servo), holes for HD VTX (walksnail v2 and Moonlight have been tested), holes for antennas and pitot tube attachment option.
Update: V4 now features a removable plate to more easily move VTX/airunit and access its side ports (sd-card, plugs,…)
Printed in PLA with 1% infill and 3 perimeters
Print the main part of the nose front side down, and use support on build plate only. It will greatly limit the support required
Hardware:
6x M3 hex nut DIN 934
4x M3x20
5x M3x8
4x M3x25
4x locking nut DIN 985
3x threaded inserts M3x5.7
Please note you will have to drill new holes in the wood bits on the T2 fuselage to securely hold the new nose
You may want to use a bit of foam behind the Decased GoPro to hold it in place in flight
Also if you fly without the GoPro in the nose, it is recommended to block the lens hole with foam or similar to avoid excessive drag