1 / 5
Scissor Jack Socket Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts the eyelet on my 1.5 ton scissor jack to a 3/4" or 19mm socket for quick up/down
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 290
- Makes
- 1
- Views
- 1,849
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapts the eyelet drive on my scissor jack (meant to be used with a hooked shaft by hand) over to a ¾" or 19mm socket.
My 1.5 ton scissor jack didn't have any method of driving with a drill. I had seen this on other jacks online, so I decided to print one. If it fails, it will likely be from rounding out the hex on the printed adapter. In that case you may want to try scaling it slightly to get a perfect fit for your socket.