80mm Fan Filter Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
80mm Fan Filter Housing for Generic Enclosures. Holds A2 Hepa VOC Filter and uses 4mm bolts and nuts for mounting
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 60
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This filter housing was designed to be used with 80mm fan assemblies supplied with Generic Enclosures. Many materials produce harmful VOC's and should have enclosures with proper filtration if the printer units are located in the home.
The design is made of two parts, housing and cover, and uses 4x 4mm bolts inserted through the housing and secured with nuts. The air flow should push through the filter so that clean air flows out of the printer enclosure. Magnets can be glued in the recess to assist with keeping the cover on the housing, mine did not need it at first.
The filters are: A2 Air Purifier Replacement Filter 3 Pack, 3-in-1 True HEPA Filter, High-Efficiency Activated Carbon Filter, Compatible with OSIMO A2 air Purifiers for Home Bedroom : Amazon.ca: Home
Material: PLA
Nozzle: 0.4mm
Height: 0.2mm
Support: No
Infill: 15%