Fully customizable Ring case/carrier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a case for my ring to be safely stored while in the gym, beach, pool, etc
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 63
- Makes
- 1
- Views
- 385
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
Fully parametric and customizable ring case with a hole to add a loop
You will need an M3 bolt and nut (i used a 10mm long one but it migth differ if you customize it to fit a larger ring or several ones).
Also a pair of cilindrical magnets i used 8x3mm ones but you can chenge it easily to any other reasonable size.
No need for supports The model already has a one layer "suport" that allows to print the stepped holes without support you will have to cut it or force a srew in the hole to remove it.
The universal version should fir most ring sizes but if you want a tighter less ratling case i would recomend customizing the model or use one of your size if available. (i will try to add more with time, fell free to ask me for your size and i will upload it as soon as possible)
The fusion file is available so you can easily change parameter for your specific ring by following the next steps.
- Measure the outer and inner diameter plus the width of your ring
- (opcional) measure the diameter and width of your magnets
- Download the f3d file
- Open the file in Fusion360
- Go to Modify>Change parameters
- Change the value of the values to the ones you measaured and
accept. - Go to Tools>Make
- Select the body and export it
- Slice the Stl file in your prefered slicer
- Happy printing
The top part is universal for all sizes the bottom part labeled as universal should fit most ring sizes.
Fell free to ask me and i will add your size to the list.
Dont forget to like and upload your make, feedback is also apreciated :)