1 / 5
Adjustable Ender3 S1 Pi Klipper Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable Ender3 S1 Klipper by Raspberry Pi Zero 2 W Camera Mount, Two rotating axes
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Raspberry Pi Zero 2 W camera circuit board measures 25x24mm.
The model file is split into parts, allowing you to customize the lens frame to fit different sizes.
Two rotating axes allow for adjustments to the tilt and horizontal rotation of the lens, positioned approximately 10 cm above the heated bed.
The base of the mount is secured using the M5 screws included with the Ender 3 S1 (as shown in the image).
The rotating axes use ：
one M3x6 screw；
one M3x30 screw ；
one M3x6x5mm Female Thread Knurled Nut.
For easier printing, please position the parts as shown in the image.
The printing time is approximately 1 hour.(100mm speed, 0.2mm layer)
You can use PLA for printing, but if you need to ensure high-temperature strength, please use materials like ABS or PETG.