1 / 2
Our Lady of Grace Mary - HueForge — image 1
1 / 2

Our Lady of Grace Mary - HueForge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

HueForge of the Virgin Mary. Can be made into fridge magnets or just a trinket.

Rating
0 / 5
Likes
4
Downloads
19
Makes
0
Views
269
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This model was generated with HueForge, as such, you must swap colours at determined layers and use filaments with a certain TD (transmission distance, basically how translucent the filament is). The filament brands I used are mostly from Brazil and Argentina, so most people won't have access to them. I might add a list of suitable alternatives with approximate TDs later.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm.

The normal size is too big for a fridge magnet, so I recommend scaling X and Y to 60%. REMEMBER TO LEAVE Z AT 100% OR IT WILL NOT WORK!! At this scale, use 0.2mm nozzle for best results or 0.3mm nozzle with 85% line width for outer walls and top surface. You might get away with 0.4mm nozzle if you reduce line width a little, but I haven't tested.

Filaments Used:
PLA Black - TD: 0.3
PLA 3N3 Marrom Ebano (Dark Brown) - TD: 0.2
PLA Slim3D Vermelho (Red) - TD: 3
PLA Dynalabs Skin - TD: 5
PLA 3D Fila Branco (White) - TD: 7
PLA 3D Fila Cinza Prime (Light Gray) - TD: 1.5
PLA 3D Fila Cinza (Dark Gray) - TD: 1
PLA 3D Fila Azul Claro (Light Blue) - TD: 2.4
PLA Elegoo Dark Blue (Medium Blue) - TD: 2.2
PLA Generic Azul Escuro (Dark Blue) - TD: 1
This print uses 10 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.52mm) swap to Dark Brown
At layer #12 (0.6mm) swap to Red
At layer #15 (0.72mm) swap to Skin
At layer #23 (1.04mm) swap to White
At layer #28 (1.24mm) swap to Light Gray
At layer #30 (1.32mm) swap to Dark Gray
At layer #33 (1.44mm) swap to White
At layer #43 (1.84mm) swap to Light Blue
At layer #46 (1.96mm) swap to Medium Blue
At layer #52 (2.2mm) swap to Dark Blue for the rest.

 

Tags