HueForge - Arnold Schwarzenegger Conquer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge - Arnold Schwarzenegger Conquer
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Wenn euch meine Arbeit gefällt, würde ich mich über euren Support freuen, damit alle Inhalte kostenfrei bleiben.
Buy me a Coffee …
Ko-Fi … https://ko-fi.com/lagnor69
Pay Pal … https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE
---------------------------------------------------------------------------------------------------------
Hier findet Ihr die passenden Rahmen dazu
200 × 140 mm & 140 mm × 200 mm || All-in-One-Rahmen
https://makerworld.com/de/models/897636#profileId-856000
200 x 200 mm || All-in-One-Rahmen
https://makerworld.com/de/models/766355#profileId-701658
---------------------------------------------------------------------------------------------------------
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x140mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA eSUN Bone White Transmission Distance: 5
PLA Sunlu Matte White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #9 (0.8mm) swap to Bone White
At layer #14 (1.2mm) swap to White for the rest.