1 / 9
REMIX - Star Adventurer Polar scope illuminator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the Star Adventure Polar scope illuminator with batteries and switch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
Info:
- This is a Polar scope illuminator for the Skywatcher Star Adventurer
- I didnt like the way the other one worked with pressing a button
- And I prefer 2x AA Batterys over a buttoncell
Things you need:
- Battery case with 2x AA and on/off switch (e.g. https://www.amazon.de/YIXISI-Kunststoff-Batteriehalter-Anschlusskabel-Halterung/dp/B08JV9S4XY/ )
- LED 5mm (RED)
- Resistor 1K (others will change the brightness, so you can experiment with the value)
- 3mm screws to mount the lid
Printing:
- 3-4 Perimeters
- 20% infill
- PETG
- Supports are needed
Instructions:
- Solder the resistor to the Anode(Long) leg of the LED
- Solder the black wire to the Kathode (short) and the red wire to the resistor
- After soldering insert the LED in the Hole and bend the wires in the slot underneath the Battery housing