1 / 3
*Improved* Standard Syringe to 6mm dowel conectors — image 1
1 / 3

*Improved* Standard Syringe to 6mm dowel conectors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

*Improved design* Standard plastic syringe to 6mm wooden dowel adaptor for school engineering task (hydraulic arm).

Rating
0 / 5
Likes
3
Downloads
17
Makes
0
Views
138
Reviews
0

Updated at source:

Model information

Category
Engineering
License
Creative Commons — Attribution — Noncommercial

IMPROVED DESIGN from my recent post https://www.printables.com/model/1114580-standard-syringe-to-6mm-dowel-conector

 

The last design had more material than required to print a solid and strong bracket; these designs have material removed for faster printing and less filament needed, whilst keeping the necessary strength.

 

Batch printing 100x of each is around 27% faster and uses 25% less material.

 

----------------------------------------------------------------------------------------------------------------

ORIGINAL POST

 

Standard plastic syringe to 6mm wooden dowel connector/adaptor. Used for a school engineering project to control a laser-cut MDF hydraulic arm (image is not mine). 2 syringes are connected (1 attached to a moving component and the other controlled by the user) with gardening reticulation tubing.

 

0.2mm layer height and no supports required.

 

For Bambu P1S (and other similar sized build plates) 100x push ends per plate and 50x nozzle ends per plate can be batch printed.

Tags