Caution / Taken / Keep Out Sign (Tabletop Miniatures)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.91 – €1.11 net (excluding VAT)
For file: Sign Caution_0.4n_0.2mm_PLA_MK4IS_42m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.01 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 42 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple print-in-place design. No supports needed.
- Rating
- 5 / 5
- Likes
- 79
- Downloads
- 267
- Makes
- 2
- Views
- 801
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Suggested print settings (for Prusa machines, others may need some tweaking):
- Layer height 0.2mm.
- Infill 15%.
- Perimeters: 3
- No supports are needed but follow the suggested print orientation for ideal results.
Assembly
Carefully fold both the front and back panels until they click into place over the hinge tab. Once in position, the hinge tab will serve as a stop, preventing the panels from folding backwards.
NOTE
While this design functions fine on a Prusa Mini / MK4 (the machines I primarily tested my designs on), I've received feedback regarding the screw thread compatibility on some other brands. After testing it on a friend's Ender 3, I now understand the issue. I've made some refinements since then, but please be aware that this problem might persist on some machines until an improved version is available.