Counting matching models…
This design bases more or loss on the idea of kipperman72 (https://www.thingiverse.com/thing:4316454), but I had to made my own design since he did not answer my request to provide other sizes. I installed this waterfall to my…
Print approx. €13.03–€15.93 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a stand to store in the backpack that would stay closed when I lifted it, so I modified the stand to keep it closed the stand that holds it closed is not very strong but I couldn't do any better
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
When printing with 0.2 layer heights and z height at 100% (22mm) the color swaps are at 17.4mm (for base gingham color), 18.6mm (for white in gingham pattern), 19.8 (for the top pumpkin pattern lines), & 21.2mm (the stem color if…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for one variant
mBot's are nice and affordable gadgets for kids to learn programming logics with Pyhton. The Ranger model has only one problem: The battery pack wich is only accessable by unscrewing the top, relies on AA batteries, so you have to replace…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
This is a simple holder for fallkniven DC4 whetstone, but will fit similar whetstones of similar size. Could be scaled to fit whatever size you have. I printed it in PLA and TPU, both work great. If you need a similar holder for any other…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
Wall art, coaster, pendant, keychain: Waterfall in clouds (two colours)
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Wall art: Waterfall (two colours)
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
Hueforge settings .08 layers with a base layer of .16 Start with Black Change to dark grey at layer 9 (.8) Switch to light grey at layer 12 (1.04) Finish with white starting at layer 16 (1.36)
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
Thank you for making my 3D model part of the short list for the Printables Award 2025 TY for your support ! Fingers crossed ! I hope lots of people will have fun with this machine because i sure did haha For the base if your printer bed…
I wanted to cool down my pool water overnight and have a waterfall for fun (and water sound :)) during the day or night. I wanted to create a pool fountain that satisfies the following: can easily be plugged into an existing pump hose…
"It's a deal!" Bill Cipher was a triangular dream demon, formerly existent only in the mindscape before succeeding in gaining access to the real world. He had been running amok in Gravity Falls, Oregon since being summoned by Stanford…
designed this for the new show coming out. it is closer to the fo4 model than the on screen one, but there's not many differences. inner diameter is 3.5 inches at the tightest. Category: Props
First, congratulations to Nigel Buckle, David Turczi, and the Mindclash team for this incredible game. It checks all of my big, heavy, space game boxes for both solo and co-op play. This insert took my brain by storm. The game trayz do a…
Dice Tower Mini Nuke from the game Fallout. Removing the lid reveals the dice channel. Drop the dice down, and they will be dispersed by the cone at the bottom, sending them in any, or all four directions. Sort of chaotic, (just like a…
Filament 1.75mm Resin Anycubic tested
An upgrade for Dummy 13 Warhammer armor Use this armor for the rest of it https://www.printables.com/model/1049018-beta-
The flow from the original waterfall fountain tends to flow to one side. This is because of a sideways water current at the mouth of the fountain, caused by it's internal structure. I have recreated the waterfall fountain from scratch in…
Deck box with bonus storage compartment modeled after a Mini Nuke from Fallout! I wanted a thematic deck box for the fallout MTG deck I just bought and thought it would be fun to make my own. I modeled this myself based on images so the…
Broken up into individual pieces for dual-color printing. I deleted the inner parts of the eye rather than painting them white but if you can do 3 colors, go for it! Grab the bowtie from the original here…
Original photos of fallen maple leaves make for a fun HueForge Experience! Play with colour and sizes to make a lovely array - I also used my heat gun to create some movement with the leaves. Maple Leaf 1 - Print at 100% infill with a…
Separated parts to print in different colors. (I'm horrible at coloring/painting solid pieces) Should only need to print 2 files: "main-plug" + "center-pipe-start-end" Smaller layer height & slower speed & higher fill for pipes/center…
This is a cap to make a waterfall bong out of a 14mm bowl and a Gatorade (or similar) bottle.
As a fan of the Fallout game series, I couldn't miss the board game. However, the most used element, the player's Pipboy, of the game is only made of cardboard and by constantly removing the pins for HP, Rad and XP the holes get squeezed…
This Fallout-inspired model is a fan-art Vault 32 Stamp by Vault-Tec . → No supports needed: Print with the stamp facing down on the build plate The process : made a quick sketch on paper, took a picture and fed it to an Ai text-to-image,…
Summary Stimpak (or Stimpack) from Fallout 4, modeled from scratch in Blender. In addition to the printed parts, you'll need a glass vial (10ml / 3 dram, 19mm diameter by 65mm long) filled with red liquid, some copper wire, a pin (I used…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Generic Black Transmission Distance: 0.2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission…
This is a digital 3D printable model of Nuka Cola caps from the Fallout . The 3D model is a game-based replica, ideal for cosplay or display. Zap that thirst! The download contains Nuka cola cap and 3 other modifications. Bottle opener…
Added the fusion file which has a few parameters for customization. The 1.1_stl is 100*150 for a 13mm outer diameter hose. The 1.2_stl is for a 19mm standard Gardena hose with some re-enforcements and higher spill walls. Use support from…
Assembly Video coming soon…. Best for printing each part at 55-75 % scale. I have not tested each part on the bed, Im currently printing each part, some parts to make functioning it will take a few drill hole. for example… the…
Hello! Thanks for checking out my first published model! This is my first time working on a model/print like this so please feel free to comment with questions, suggestions and requests! Features : Fallout/Atomic era styling Removable…
Quick and dirty waterfall showerhead for 1/2 inch threads (most common).
Variations of many different Fallout universe creatures, monsters, robots, etc. Crafted for your ttrpg play. Some are my own creations, and some are inspired variations from the games and show.
Need a sign to go on my door to the basement (that's were my workshop is) I modeled this up and will be printing it but wanted to share.
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Hangs an Angle Grinder from the Protective Sheath. I designed it for my Dewalt DCG416 but likely works with others. The Radius of my…
Mini Maple Leafs – Fall Decor Pieces These are small maple leafs designed for decoration . Perfect for autumn-themed setups, DIY projects, table decor, or photo backgrounds. Each leaf features fine details and a clean, minimalistic look —…
The game didn't come with nearly enough of these for even our first game, so, I modeled some! There's a test file here for you to test out the fitment before printing the individual guilds. As for printing, at 0.20 mm layer height, I…
Fruit fly trap for a Weck preserving jar (80mm lid). The jar should contain something that attracts the fruit flies (e.g. old fruit, water/vinegar mixture). The fruit flies follow the smell through the funnel into the jar, but then cannot…
Desktop Waterfall. You could also have no water and use as decoration or pots.
A neat little protractor that doesnt fall apart for measuring all those odd little corners in life. "This is a protractor for measuring corners. For instance it can be used to determine the angle between two walls. It has the advantage of…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 55x163.62mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2mm and the Actual Depth is 2.1mm…
Fallout 4 / Fallout 76 Minute Man Mortar Shell Created this a couple of years ago, decided to release it to the public now. It's splitted in multiple parts to make 3d printing easier without using any support. Follow Me: Website:…
Just a tiny lagoon for my waterfall, which started slidly leaks :-) I divided print into 4 parts, it might be better to don't use connector, because it won't fit perfectly, it laks tolerance (slicer's limit). Použité 3rd party modely…
To maximize bed space in my Sovol Sv06 (225x225x250), I scaled y-axis to 145mm and z to 5mm and rotate it a bit to fit the bed in Cura.
Objective Be the last player to successfully place a leaf without knocking all the leaves down. For 1-4 players Setup Assemble the tree trunk. Place the branch in such a way that a leaf can be put into the slot without falling out (too…
Small Garden Waterfall , printed in multiple parts
Steven Scarberry's Mothman Shrine from Fallout 76. I ripped it from the game files, cleaned it and attempted to fix the manifold. You may want to consider slicing and printing the wings separately. Add plenty of support for the wings. The…
I will be making more and making a Rocket League soccer/heat seeker ball
PLS FOLOW ME I DON'T MAKE THIS COS IM BORD ITS FOR ME TO MAKE MORE PEOPLE HAPPY
I needed a might trap for my new coop and designed it as a single unit for easier installation. I printed this part with ABS, but PETG or even PLA will be probably be fine. Hole for perch: 8mm (approx. 5/16 inch) Screw for mounting:…
Double handle (balanced) crank.
For this model, which cannot be dropped by shaking, 1.75mm filament cut from the spool was used for the hair, inside of the eyes and mouth. To curl the hair, you should keep the filament on the hot printer table for a while to soften it.…
Funny Sign - “The Sooner you fall behind, the more time you'll have to catch up”, multi colour print, printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign…
I will be making more and making a Rocket League soccer/heat seeker ball
PLS FOLOW ME I DON'T MAKE THIS COS IM BORD ITS FOR ME TO MAKE MORE PEOPLE HAPPY
I have always loved the Fallout franchise, but Fallout 4 was something special and I logged way too many hours playing and re-playing that game. It is probably my all time favorite RPG and I always seem to venture back for a bit of fun…
I Have Been Working On This Figure For A While! Hope the long time I spend working on this model will make the wait time worth it! I’m like Fall guys as Much As Among us So I decided to Make This Figure
Fallout Shelter sign Wall Decoration Logo Poster. I have uploaded 2 designs, one for those that have a multi-color system (AMS, CFS, MMU...) and another with which multi-color is not necessary, the color is changed by layer number. Ready…
Design Information Pitfall traps are traps that are mostly buried to catch crawling critters moving along the ground. Depending on where you live you can expect to catch a wide number of different critters. The trap fits a standard 8cm by…
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
All my models are free. Due to banking restrictions in my country, I’m unable to sell models directly. If you’d like to support my work, you can do so on Patreon. https://www.patreon.com/15369015/join
This is a corvette token for the board game Voidfall to replace the cardboard pieces. The token design is based off of the amazing Ian O'Toole's artwork, and has a slot to hold up to three Fleet Power cubes. Print Settings Printer Brand:…
I recently received my pre-orders for IDW's TMNT boardgames, Change Is Constant and Cityfall. I'm loving the games so far, but I quickly realized that I wanted a better way to store the various cardboard components, cards, and dice. So, I…
Hello friends! 🌟 I recently designed a lamp featuring the BambuLab logo and, inspired by it, created a special lamp for Fallout fans. 🕹💡 This lamp is compatible with the LED Lamp Kit 001, available at the Bambu Store, and also works with…
In Sodor Fallout during chapter July 9th, 1973. two diesel locomotives arrived at tidmouth sheds, one being Mavis who had cracked windows, bullet holes over, a bloody front cowcatcher, and a shield made from a 3 plank wagon. similar to…
PLS FOLOW ME I DON'T MAKE THIS COS IM BORD ITS FOR ME TO MAKE MORE PEOPLE HAPPY
My take on Hextra's amazing Voidfall insert! I love his design, but really wanted to incorporate some tech and house card trays I had bought on Etsy prior to getting a 3d printer. These trays are awesome because they make finding the…
This is an abstract art piece called falling beads It should be printed laying down on its side to minimize the need fo
Dual sectioned pools with waterfall for terrarium. I have hermit crabs that require both fresh and salt water pools. This was build to accomodate both. Mini water pump with 10mm hose fits in the holes to produce the waterfall effect. I…
Hier ist mein designe für einen Handtuchhaken, den ich nun bei mir in der Küche hängen habe. Als Handtuchhaken (für Hände) habe ich mich für die Sechsfinger Hand aus der Serie „Willkommen in Gravity Falls“ entschieden. Ich finde, sie…
Slightly modified Buzz's hose adapter to allow connecting a standard 1" hose with a hose clamp. I also extended the adapter to allow clearance for the bolt that tightens onto the pool frame. The adapter gets epoxied into the fountain body.
Caravan from Fallout 76 with sliding doors. side windows 2 pcs
Zao the Sub Commander This 3D-printable wasteland invader is inspired by a deep and enduring love of Fallout 4. Overlook the fact that he nuked part of Boston and he's holed up in a radioactive underwater tube. Commander Zao is part…
My wife needed a wastebasket for her sewing machine. And I wanted to be “best husband” :-) Printed in PLA (doesn't matter) with 0.6 nozzle and 0.32 layer height using the input shaper profile. Printtime around 2 hours. Da meine Frau einen…
Print details: Material: PLA or PETG Layer height: 0.2mm Supports: NO Infill: 15% Multimaterial painting SMART FILL
Detailed ghoul figurine inspired by the Fallout universe, capturing the iconic post-apocalyptic look of one of the wasteland’s most recognizable characters. This figure features exaggerated facial features, a slightly unsettling…
This is a fully 3D printed upgrade for the waterfall in Life of the Amazonia. I really should sell this one, but I want as many people to enjoy it as possible because I spent a lot of time on it. While there are many fun things that could…
this piece install into existing fish tank water filters and hangs off the edge of the fish tank to form a gentle waterfall. i use this to make the water calmer for my beta fish (his name is water :)
Please like and follow for freefall 3.0!
After more plays of the board game Voidfall I have revised my Player Tech stands for the triple-layered House boards with three improvements: Table space is at a premium in this game, so the right Player Tech stand now has a slot to put…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
The fusion cell is a key part of the lore of Fallout games as well as the combat mechanism. As a platform for making other projects, such as a fallout themed battery bank or just a basic paperweight, this model is here to supplement…
neat thing I 3d modeled added each part seprately
* Сreated from a low-poly model from the fallout 3 * Easy to print
Just a Sillyshell with some AMS-friendly detailing to make it look like a Fallout Energy Cell, for use with the Fallout AER9 Blaster shell by Methanejuice I set up my AMS with yellow, red, black, and white, and included my 3mf file so you…
It's just a basic shape that looks like the metal scrapes from Fallout 76. In the picture I have 2 examples. The silver bar I didnt sand (to see how it would come out) but I did sand the gold bar.
What a surprise to place your gifts in. What great fun!
I wanted to make some coasters for fun so people could pick the factions from FO4 they like. Some of the color choices were easy others I had a hard time picking. The main file containing all the models on separate plates was done with…
This model was designed to solve a very common problem: my washing machine does not sit flush against the wall, and small items kept falling into the gap behind it. Retrieving them always required pulling the entire washing machine…
Wanted a simple guide to sharpen all my knives. Created few prototypes before having this last version which is the most convenient for me.
Meant to be badge sized, this is a non canon logo for the USSA, the Fallout equivalent of NASA to give them a worm logo
Just two simple single-part inserts for Alice is Missing and the Silent Falls expansion. I didn't sleeve my cards, and didn't design these insert to accomodate sleeves. There is enough room in the base game box to hold the expansion…
I didn't know where to put the character chips, so I made an insert in the dice tray. Fits perfectly into original desin
Just a hook for the Fällkniven C10 ceramic sharpener. You can screw in an SHCS M3x35 screw to strenthen the hook, but it is completely optional. Use a strong double-sided tape to moult in on the wall.
Make a 1V1 set or battle Royale it’s your choice
