1 / 2
97x32mm Blower Fan Cpap Duct — image 1
1 / 2

97x32mm Blower Fan Cpap Duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cheap but highly effective Cpap using a 20$ fan

Rating
0 / 5
Likes
3
Downloads
32
Makes
0
Views
336
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Cpap duct with built in support made to be removed for easy printing. 

Uses a 97x97x32mm blower fan available on Amazon for 20$ or less. Look for a metal center on the fan or else it wont be the powerful version. These fans run up to 6amp at 12v so wire the V+/GND to your 12v PSU directly. DO NOT TRY TO POWER THESE FANS THROUGH YOUR MAINBOARD!  You can however use your mainboard or Pi to control the PWM signal. 

Blue wire = PWM

Yellow wire = Tachometer (i think)

Other info:

The fans take a while to spin-up. Some slicers have options to start the fan early, I recommend 2-3 seconds of ramp-up time. 1 second of full power (kick-start).

Tags