1 / 6
Radiomaster Boxer Transmitter Cooler Expansion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slots into the external transmitter slot and blows cool air over the internal transmitter. Uses 5v 25x25 fan.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Cooler for the Radiomaster Boxer Internal Transmitter.
Slots into the External Transmitter slot and blows air over the internal transmitter.
Used a 5v fan with 25x25 mounting holes.
Fan is connected directly to radio's 2s battery with 10ohm resistor, to drop voltage down, and a switch to manually turn it on and off.
Requires opening radio up and making a hole in the back panel.
Printed in PLA at 0.2 layer height.