Mini SFP Media Converter Enclosure Tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and tiny enclosure for a mini SFP to 1Gbps RJ-45 media converter from AliExpress (SFP only PCBA variant).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A simple and tiny enclosure for a [mini SFP to 1Gbps RJ-45 media converter from AliExpress (SFP only PCBA variant)](https://www.aliexpress.com/item/1005003671214339.html).
Print upright:
* Tube enclosure - print in model orientation
* Tube cap - print rotated 180 degrees on X or Y axis so flat side is on print bed
Designed to be printed with 3 perimeters (thickness of the shell is 2.49mm), 4+5 bottom/top layers (thickness of the caps is 1.8mm).
If using SFPs that get warm (ZR, GPON ONU SFPs and similar), do not print in PLA as enclosure will melt; use a higher melting point material like PETG, ABS, ASA etc.