Vynckier fix-o-rail door hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement doorhinge for an old style Vynckier fix o rail electrical cabinet.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 52
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This is a replacement doorhinge for an old style Vynckier fix o rail electrical cabinet.
These old cabinets usually have fragile hinges, causing them to brake easily.
I have printed mine in ABS, PLA might work but i didn't test it.
the design of the hinge is such that it has to be able to flex a bit, this keeps the door from loosely swinging.
The design is almost an exact match for the original, except some small features that i think were mostly visual.
Included are some pictures of the electrical cabinet for reference, and how the original hinges usually break.
for strength it should be printed on it's side (see first picture), no supports are required.
100% infill.
With the ABS i used a wide brim to prevent it from detatching, cleanup was quite easy.
I printed this on an ender 5 with clipper, which took around 15-20 minutes.
I made the opening a bit smaller (2mm > 1,9mm) because my version fitted quite loosely, which might have to be cut away a little bit for a perfect fit.