1 / 6
UPDATED Arduino Nano Bumper with added protection (for screw terminal "shield") — image 1
1 / 6

UPDATED Arduino Nano Bumper with added protection (for screw terminal "shield")

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple "bumper" frame with added protection for an Arduino Nano adapter with screw terminals.

Rating
0 / 5
Likes
6
Downloads
34
Makes
0
Views
300
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

A simple "bumper" frame for a small Arduino Nano adapter “shield” with screw terminals. This version adds walls around all sides of the PCB, so that components that are mounted onto the screw terminals are somewhat protected while handling the thing. 

Note: The first version had these walls only on two sides, which made them somewhat fragile. The updated version (v2) now has walls all around. v2 is the recommended version.

My application is an Arduino Nano that is set up as ISP. The three LED (for Hartbeat, Communication and Error) are visible in the photo.

Printed using PLA, 0.2 mm layer height. 

 If you don't need the sidewalls, there is also a version that consists only of the basic frame. 

Note that this is not for the “official” Arduino Nano Screw Terminal Adapter. The bumper shown here is for the smaller, simpler adapter that is visible in the photo.

Tags