Cube lamp with E27 bulb

Cube lamp featuring two options of design:

1. Smooth outside walls (150x150x144 mm)
2. Abstract geometric pattern outside walls (152x152x144 mm)

I upload .3mf files for lamp bodies with included supports as well as .stl files. 

To assemble entire lamp you would need:

1. Purchase E27 socket for installation
2. Purchase E27 bulb
3. Print cube lamp body
4. Print 4x lamp side walls - in my example white walls, but you can experiment with different color
5. Print 1x lamp top round wall
6. Print 1x E27 socket holder

WARNING! Maximum height of the socket+inserted lamp is around 155 mm! Also, socket holder is designed for 35mm max diameter of the socket, if you would need a bit smaller/bigger, please leave a comment!

Assemble guide:

1. Take cube lamp body and place facing bottom up
2. Insert top round wall in the sockets
3. Insert E27 socket holder in the inside corner
4. Place cube lamp body facing top up
5. Insert 4 side walls in the slots - all walls have different width vs height, so if you can't fit, please rotate the wall
6. Insert E27 socket inside of the holder
7. Insert bulb
8. Put socket cable in the small hole in the base of the lamp
9. You are ready to go!