Bjorn the Cyberviking case (Pi Zero 2 W + Waveshare v4)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A snap-in case to accommodate Bjorn the Cyberviking made for Pi Zero 2 W with Waveshare 2.13 v4 screen.
- Rating
- 4.667 / 5
- Likes
- 50
- Downloads
- 510
- Makes
- 6
- Views
- 2,887
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
A snap-in case for the little Bjorn. Designed to be as petite as possible while not compromising on case integrity. The parts fit snuggly, however, it is relatively easy to disassemble the case if needed. The case also features vents for cooling for those of you leaving Bjorn to pillage for extended periods of time.
Hardware used:
- Raspberry Pi Zero 2W,
- Waveshare e-ink 2.13-inch screen v4.
All parts can be printed with 0.2 layer height. If you want better details try printing inlays with 0.12 layer height. Tested on both PLA and PETG.
Credits for the Bjorn project go to infinition: https://github.com/infinition/Bjorn