Korsar 240 42 Handguard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handguard for installing additional equipment on the reservoir of the Korsar 240 pistol. Makes it possible to install bi
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 109
- Makes
- 0
- Views
- 558
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
We print boldly from PetG and don't worry, and that's happiness. 4 perimeters, 25 fillings, 0.4 mm nozzle, 0.2 mm layer. We print in an upright position, it is better to turn the handguard over and put it with the back side down.
To compensate for shrinkage, I recommend setting the scale to 101%
For assembly, you will need 3 brass m3 fused bushings; 2 DIN 7991 m3x8 mm screws; 1 hexagon socket screw DIN 912 m3x18.
The assembly is very simple, using a soldering iron, we install the sleeve in part 2. We put the handguard on the tank so that it extends beyond its back by 10 mm. We insert part 2 into its place. We fix everything with m3 screws.
If the handguard is still moving along the axis of the tank, then I recommend gluing double-sided tape under the back cover.
08.01.2025 I made a cutout for the tank pin.
09.01.2025 Added part 2.1 to eliminate movement along the axis of the tank.