1 / 3
Parametric Case for Orienteering Compass (Suunto A30)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple parametric box to transport your compass / busola when not in use. Modeled after the Suunto A30.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As I did not find any similar model, decided to create this simple case to store my compass. It is modeled after the Suunto A30, so for other compasses the parameters might need changing.
Parameters:
- Length - Sets the length of the compass without including the semi-circle. Measured at the end of the the straight long edge of the compass, before it turns into a semi-circle.
- Width - Sets width of the compass.
- WallThick - Sets the thickness of the walls of the case.
Suggested print settings:
- FLEX filament;
- 0.2 Structural on the Mini+ IS;
- 15% infill;
- 2 perimeters.
If printing in PLA or PETG, check printer tolerances and increase lid by 1-2% to make sure that it closes.
Happy printing! If you print, please post a make.