1 / 5
ESP32 Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard sized ESP32 enclosure with side mounted outlet bracket
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Standard sized ESP32 enclosure with a USA style outlet plug extension for a side mounted wall plug. Wave cut out in 3MF file as negative volume for venting. Useful for an ESPHome Bluetooth Proxy that does not require additional electronics.
Note: This was made for the Micro USB version of the board and might not fit the USB-C version.
- Fits ESP32-WROOM-32D module (maybe yours too!)
- Print in any material
- Vented for heat distribution
- Fits Micro USB adapter
- No additional parts or installation required
Ideal for Home Assistant Bluetooth Proxy / ESPHome
Print Settings
- Material: PLA
- Perimeters: 2
- Infill: 5%
- Layer height: 0.3mm
- Nozzle diameter: 0.6mm