1 / 3
Russell Hobbs Kettle base 26622FD
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The base of a Russell Hobbs Kettle, which replaces one that got damaged.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a replacement base for a Russel Hobbs kettle.
You can find the original model here for copying: https://cad.onshape.com/documents/ab1f8907dbb5e45b13ed803e/w/ac5cce19aadbac3f34aa9643/e/0a8c54643d57dbdd22bd4b70?renderMode=0&uiState=6783b19270b1b216e517aa26
Although I modelled it with all four screw mounting points, in the end I decided it was better and easier to exclude the tri-wing security screws as they don't make the base more secure.
I used the following settings. A smaller nozzle could be used.
- Print material: ABS or ASA for heat resistance
- Supports: Not needed - print in two parts and glue together using acetone
- Layer height: 0.40mm
- Nozzle width: I used 0.60mm
- Infill: 10%
- Bed adhesion: I always use a PVA glue stick