1 / 3
Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) [updated]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base Raspberry Pi Case for a Pi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply) by Waveshare.raspi
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 211
- Makes
- 2
- Views
- 1,637
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a base Raspberry Pi Case for a RaspberryPi Zero 2 W(H) with mounted UPS HAT (C) (Uninterruptible Power Supply including I2C) by Waveshare.
Update: replaced the connector doors.
Settings | Value |
|---|---|
Infill | 25% (adaptive cubic) |
Perimeters | 2 |
Layer Height | 0.15 mm Speed |
Material | PETG / PLA |
Supporting Material | only overhangs / organic |
Comments | |
Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!