Ender 3 Pro\S1 Oldham Coupler (different tolerance offset)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender 3 Pro\S1 Oldham Coupler (can be compatible with other Ender 3 printers)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Original descriptions:
Two base pieces and one middle piece are needed for a single lead screw. An additional two M3 screws are required to hold one of the ends on the X-gantry bracket and the other with the lead screw nut.
Some slight sanding and silicone grease were required to ensure it slid smoothly in the X and Y directions but was tight enough to not have much slop in the Z direction. I printed it with Inland PLA+, but PETG might be better due to its slippery finish.
Changes:
Changed tolerances for tighter fit. Added Fusion360 project with tighter tolerance offset as parameter. (See on pics)
For me, I used one -0.15 mm and one -0.1 mm offset tight versions. Printed with 0.2mm nozzle with PLA