1 / 4
Weighted Figure Painting Handle with Cork Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Weighted figure painting handle with cork insert. The base has 2 M10 nuts inside for stability.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Weighted figure painting handle with cork insert. The base has 2 M10 nuts inside, placed during a pause in printing for stability.
It's 11 cm high, easy to hold and rotate while painting. I use corks that I have lying around, the top has a 21.2mm opening with a small taper to 21.04mm and the hole for the cork is 45mm deep. So check your own corks to see if they fit.