DeltaWave DW1 - Heltec V3 Wireless Stick Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heltec V3 Wireless Stick Enclosure for both the Wireless stick and Wireless stick Lite
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 94
- Makes
- 3
- Views
- 1,043
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
Enclosure for a Heltec V3 wireless stick / stick lite to be used with Meshtastic.
The Heltec V3 wireless stick comes with buttons on the sides which are awkwardly placed to be used in an enclosure especially when you add a battery.
Features
- This enclosure allows you to relocate the buttons to the front face.
- Comes with 2 front face covers one with and without a cutout for the LCD. The LCD less front cover can also be used on the Heltec V3 wireless stick with LCD (LCD is not correctly supported by meshtastic)
- Snap fits together
Extra items needed.
2 x 6x6mm tactile switches
Superglue to keep the buttons in place on the button retainer.. Make sure not to get glue on the tactile switch button it self.
Buttons are soldered onto pin RST and 0 and the other ends of the buttons goes to GND.
Print Settings
PETG - Better for outdoor use but PLA should be ok if you are not going to leave it in the sun or a very hot area (Car Dashboard)
Layer height 0.2 or 0.3
No supports needed.