Pastamatic V-Slot or T-Slot Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modification to two parts of Pastamatic and additional handles for the ends of V-Slot or T-Slot mounting frame.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 135
- Makes
- 1
- Views
- 1,387
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I changed the gap between the Target & passive Cradle from 0.3mm to 0.05mm gap. That was a nice fit for me. I added a test print for 0.05mm gap & 0.10mm gap as Cradle_Mod_05_Test.stl & Cradle_Mod_10_Test.stl. You will need to have printed the driven cradle part from original parts to test fit this.
There is also a Pastamatic_Mod.3mf with the print settings used by the original design. You will need the rest of the files from the original design located here. https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c
The end handles I modified the Handle - Side.stl from: https://www.printables.com/model/479022-stand-for-bambu-lab-filament-spool-switcher-winder
I used the drive spindle clip.stl & spindle clip.stl to hold spindles on from: https://www.printables.com/model/1058220-easy-hand-crank-for-pastamatic
I used 2 - 2020x500mm length of V-Slot Linear Rails using Handle_End_V_Slot.stl for the end handles. I also included a version for T-Slot if you prefer. You might be able to go a little shorter than 500mm on the aluminum extrusions, but not much.
I included the fusion 360 source files if you wish to edit these further.
The additional hardware I used was:
4 - M5x25mm (to connect Crossbars to the V-Slot)
10 - M5x12mm screws
14 - T-Nuts
2 - V-Slot 2020x500mm length Linear Rails