10mm belts E3NG mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made 10mm belt mod for E3NG (with double shear!)
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 69
- Makes
- 0
- Views
- 1,067
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOT TESTED! READ THROUGH THIS FIRST! DO NOT RUN AT SUPER HIGH TENSIONS, AF TYPE PULLEYS MAY DAMAGE THE BELTS!
This mod requires:
14x 695 bearings, not flanged
2x f695 bearings, not including ones from original e3ng
2x AF type 10mm pulleys, 5mm bore https://www.aliexpress.us/item/3256805700105694.html Like this one
4 meters of 10mm GT3 / GT2 belts (gt3 referring to gates teeth version 3, not 3mm pitch) https://www.aliexpress.us/item/3256806669838511.html Like this one
28x m5x10x0.5 washers https://www.aliexpress.us/item/3256807508775328.html Like this one (M5x10x0.5)
4x m5x30 (or longer) screws
Nothing else, I think
If you have the CAD from RH3D already and are interested in looking/revising the 10mm belt mod, please reach out in the comments.
NOTES:
Side gantry blocks need support, please add that in the slicer.
Bearing stacks go in this order: washer, f695, 695, f695, washer
Rods have a greater spacing, so it is not compatible with e3ng modded toolhead_bases (only stock e3ng toolhead)
Print out the objects on the plate labeled “BOTH VERSIONS” and print out the objects on the plate for the “Smaller Version” (compatible with all hotends on e3ng toolhead) OR the ones on “Bigger Version” (compatible with M or bigger hotends, may be used for center of mass optimized toolhead, later on).
Any feedback is greatly appreciated!