MK4S Spool Guide
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.18 – €0.22 net (excluding VAT)
For file: Filament Holder Lock_0.4n_0.15mm_PLA_MK4S_13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.20 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 13.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spool guide for MK4S enclosures
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 40
- Makes
- 3
- Views
- 325
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To hold a spool further towards the outside of the enclosure and away from the print head of the MK4S, put this around the spool holder and use a spare M3NS and M3x8 or 12 bolt to clamp it down. Once clamped down it holds the spools off to the side reducing the chance for the new MK4S head to impact at full travel.
Printed at 15% infill in PLA